Equation of Motion for an Object Moving in a Rotating Coordinate System
Formula1
In a coordinate system rotating with angular velocity $\boldsymbol{\omega}$ relative to an inertial frame, the equation of motion for an object of mass $m$ is as follows.
$$ m\mathbf{a}^{\prime} = \mathbf{F} - m\mathbf{A}_{0} - m\dot{\boldsymbol{\omega}} \times \mathbf{r}^{\prime} - 2m\boldsymbol{\omega} \times \mathbf{v}^{\prime} - m\boldsymbol{\omega} \times (\boldsymbol{\omega} \times \mathbf{r}^{\prime}) \tag{1} $$
Here $\mathbf{F}$ is the force actually acting on the object, and the primed ($\prime$) quantities $\mathbf{r}^{\prime}$, $\mathbf{v}^{\prime}$, $\mathbf{a}^{\prime}$ are the position, velocity, and acceleration of the object measured in the rotating frame. $\mathbf{A}_{0}$ is the acceleration of the origin of the rotating frame relative to the inertial frame.
The force that an observer in the rotating frame perceives as acting on the object, namely the left-hand side of $(1)$, is called the effective force and is written as follows.
$$ \mathbf{F}_{\text{eff}} = m \mathbf{a}^{\prime} $$
That is, the effective force is the actual force $\mathbf{F}$ plus the remaining terms on the right-hand side of $(1)$, and these remaining terms are the fictitious forces.
Explanation
In an inertial frame, $\mathbf{F} = m\mathbf{a}$ holds, but the acceleration $\mathbf{a}^{\prime}$ measured in a rotating frame differs from the acceleration $\mathbf{a}$ in the inertial frame, so in general $\mathbf{F} \ne m \mathbf{a}^{\prime}$. Therefore, to keep the same form as Newton’s laws of motion in the rotating frame as well, the terms arising from the motion of the coordinate system must be added as if they were forces, in addition to the actual force $\mathbf{F}$. The terms added in this way are called fictitious forces or inertial forces, and each term has a name.
- $-m\mathbf{A}_{0}$: the translational inertial force arising when the origin of the frame accelerates
- $-m\dot{\boldsymbol{\omega}} \times \mathbf{r}^{\prime}$: the Euler force arising when the angular velocity changes
- $-2m\boldsymbol{\omega} \times \mathbf{v}^{\prime}$: the Coriolis force, which appears only when the object moves in the rotating frame
- $-m\boldsymbol{\omega} \times (\boldsymbol{\omega} \times \mathbf{r}^{\prime})$: the centrifugal force, directed outward from the axis of rotation
Fictitious forces are not interactions between objects but appear because the coordinate system was chosen to be non-inertial, so they have no reaction in the sense of Newton’s third law. Among these, the Coriolis force vanishes if the object is at rest relative to the rotating frame ($\mathbf{v}^{\prime} = \mathbf{0}$) or moves parallel to the axis of rotation ($\mathbf{v}^{\prime} \parallel \boldsymbol{\omega}$). It is the only one of the four inertial forces that depends on the velocity of the object.
If the origin of the frame moves at constant velocity ($\mathbf{A}_{0} = 0$) and the angular velocity is constant ($\dot{\boldsymbol{\omega}} = 0$), only the Coriolis force and the centrifugal force remain.
$$ m\mathbf{a}^{\prime} = \mathbf{F} - 2m\boldsymbol{\omega} \times \mathbf{v}^{\prime} - m\boldsymbol{\omega} \times (\boldsymbol{\omega} \times \mathbf{r}^{\prime}) $$
Since the Earth rotates, a coordinate system fixed to the Earth’s surface is also a rotating frame. The eastward deflection of a freely falling object, the rotation of the plane of oscillation of a Foucault pendulum, and the direction of rotation of typhoons are all explained by the Coriolis force in this equation.
Derivation
Consider a coordinate system rotating with angular velocity $\boldsymbol{\omega}$ relative to an inertial frame. Primed ($\prime$) quantities are values measured in the rotating frame; $\mathbf{r}^{\prime}$, $\mathbf{v}^{\prime}$, $\mathbf{a}^{\prime}$ are respectively the position, velocity, and acceleration of the object as seen in that frame. $\mathbf{A}_{0}$ is the acceleration of the origin of the rotating frame relative to the inertial frame. Then the acceleration of the object as seen in the inertial frame is as follows.
$$ \mathbf{a} = \mathbf{a}^{\prime} + \dot{\boldsymbol{\omega}} \times \mathbf{r}^{\prime}+ 2\boldsymbol{\omega} \times \mathbf{v}^{\prime}+\boldsymbol{\omega} \times ( \boldsymbol{\omega} \times \mathbf{r}^{\prime}) + \mathbf{A}_{0} $$
Since Newton’s second law $\mathbf{F} = m\mathbf{a}$ holds in the inertial frame, substitute the above expression into it.
$$ \mathbf{F} = m\mathbf{a}^{\prime} + m\dot{\boldsymbol{\omega}} \times \mathbf{r}^{\prime} + 2m\boldsymbol{\omega} \times \mathbf{v}^{\prime} + m\boldsymbol{\omega} \times (\boldsymbol{\omega} \times \mathbf{r}^{\prime}) + m\mathbf{A}_{0} $$
Leaving only $m\mathbf{a}^{\prime}$ on the left-hand side and moving the remaining terms to the right-hand side yields the formula.
$$ m\mathbf{a}^{\prime} = \mathbf{F} - m\mathbf{A}_{0} - m\dot{\boldsymbol{\omega}} \times \mathbf{r}^{\prime} - 2m\boldsymbol{\omega} \times \mathbf{v}^{\prime} - m\boldsymbol{\omega} \times (\boldsymbol{\omega} \times \mathbf{r}^{\prime}) $$
Grant R. Fowles and George L. Cassiday. Analytical Mechanics (7th Edition, 2005), p189-201. ↩︎
